| Customization: | Available |
|---|---|
| After-sales Service: | Technical Support& Parts Replacement |
| Warranty: | 1 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | DT52-550CY | DT75-530CY | Standard configuration Assorting |
|||
| Processing scope |
Maximum turning diameter of the machine tool | 600mm | Standard configuration | |||
| Maximum machining diameter of discs | 300mm | Standard configuration | ||||
| Maximum turning length | 550mm | Standard configuration | ||||
| Maximum milling length | 620mm | 605mm | Standard configuration | |||
| The minimum distance between the claw and the cutterhead |
-70mm | -85mm | Standard configuration | |||
| The maximum distance from the claw to the cutterhead |
550mm | 535mm | Standard configuration | |||
| Center height of countertop | 100mm | Standard configuration | ||||
| Workbench size | 488mm*388mm | Standard configuration | ||||
| Principal axis | Spindle structure | High rigidity integral mechanical spindle, electric spindle |
Standard configuration | |||
| Spindle nose end form | A2-6 | A2-8 | Standard configuration | |||
| Main spindle through-hole | φ66mm | φ86mm | Standard configuration | |||
| Maximum spindle speed | 0-4500r/min | 0-3000r/min | Standard configuration | |||
| Tooth shape of main shaft pulley | 8YU | Standard configuration | ||||
| Rotating tail top |
Top models | Moshi No.4(fixed tip) | Standard configuration | |||
| Tailstock structure | Servc tailstock |
Hydraulic tailstock |
Servo tailstock |
Hydraulic tailstock |
Standard configuration | |
| Tail seat travel | 500mm | 420mm | 500mm | 420mm | Standard configuration | |
| Maximum distance from claw to tip | 630mm | 610mm | Standard configuration | |||
| Feed | Feed motor flange | 130/174 models | Assorting | |||
| X-axis guide rail model | 35 rollers | Standard configuration | ||||
| Y-axis guide rail model | 35 rollers | Standard configuration | ||||
| Z-axis guide rail model | 45 rollers | Standard configuration | ||||
| Tail rail model | 35 rollers | Standard configuration | ||||
| X-axis screw model | 3210-C3 | Standard configuration | ||||
| Y-axis screw model | 3210-C3 | Standard configuration | ||||
| Z-axis screw model | 3210-C3 | Standard configuration | ||||
| Tail screw model | 3210-C3 | Assorting | ||||
| screw bearing | 2562-P4 | Standard configuration | ||||
| Stroke | X-axis maximum stroke (cutter size 330mm) | 260mm(-110mm~+150mm) | Standard configuration | |||
| Y-axis maximum stroke | +58 to-50mm(85mm center height cutterbed) | Standard configuration | ||||
| +58 to-58mm(100mm center height knife holder) | Standard configuration | |||||
| Z-axis maximum stroke | 620mm | Standard configuration | ||||
| Maximum stroke of tailstock | 500mm | Standard configuration | ||||
| Fast moving speed |
X-axis quick positioning | ≤24m/min | Standard configuration | |||
| Y-axis quick positioning | ≤10m/min | Standard configuration | ||||
| Z-axis quick positioning | ≤24m/min | Standard configuration | ||||
| Quick positioning of tailstock | ≤10m/min | Standard configuration | ||||
| Accuracy | X-axis repeated positioning | ±0.003mm | Standard configuration | |||
| Y-axis repeated positioning | ±0.003mm | Standard configuration | ||||
| Z-axis repeated positioning | ±0.003mm | Standard configuration | ||||
| Optional standard configuration |
External protective sheet metal | Full surround protection | Assorting | |||
| Internal protective sheet metal | Full protection | Assorting | ||||
| Power knife tower | BMT45-15 workstation/BMT55-12 workstation | Assorting | ||||
| Optional Accessories |
Chip conveyor | Integrated chip removal machine for rear water tank |
Assorting | |||
| Rotary cylinder | 8-inch hollow 52mm through-hole | Assorting | ||||
| Hydraulic chuck | A2-6(8 inches) | Assorting | ||||
| Spindle pull rod | M60*2-M60*2 through-holeφ 52mm | Assorting | ||||
| X-axis coupling | Screw end φ22mm/total length 80mm | Assorting | ||||
| Y-axis coupling | Screw endφ22mm/total length 80mm | Assorting | ||||
| Z-axis coupling | Screw endφ22mm/total length 80mm | Assorting | ||||
| Hydraulic station | 2HP three way capacity 50L | Assorting | ||||
| Thin oil electric lubrication pump | Single phase 220V-4L detection volumetric type | Assorting | ||||
| Water pump | Three phase 380V immersion circulating pump | Assorting | ||||
1. When can I get the price?
We usually quote within 8 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2. How to confirm the quality?
We have more than 20 years of experience in CNC machine tools and have been serving Chinese factories and machine tool foreign trade companies. You can take a video tour of our factory, and you are welcome to visit the factory. you afford the express freight.
3. What are your terms of delivery?
We accept EXW, FOB, CFR, CIF, DDU, DDP, etc. You can choose the one which is the most convenient or cost-effective for you.
4. Why choose us?
1: Export all over the world.
2: Perfect workmanship.
3: We always develop more than 1000+ new items each year.
4: Timely delivery.
5: Customs first.
6: High quality at a reasonable price.
7: Quick response to all your inquiries.
8: Offer a complete product line of items you could think of,It means one one-stop solution for your project.
9: Owner of the manufacturer, we could provide you with competitive prices with strict quality control.
10: Besides OEM, we could handle ODM and work together to complete your project as we have.
11: Good experience of cooperation with different international customers. We gained a lot of Excellent after-sale service.12: We
have professional teams who can make various kinds of figure toys according to your design, artwork, or product samples.
13: We make project step by step to match customer's requirements and avoid any mistakes.
){kind=link}